PreSonus AUDIOBOX USB (2 Input) - Wall Mount V2

A mount I made for my PreSonus AUDIOBOX USB, audio interface for my PC. It is made specifically for the 2 port (input) audio interface by PreSonus. V2 is the black mount and V1 is the white mount.

File type is .stl.

Warning:

For successful printing, make sure you print the mount with the inner tab towards the build plate. This is what holds the audiobox inside the mount when attatched to the wall.

Mounting:

Drill screws until full depth of inset is reached.

Compatability:

Should work with all 2 input PreSonus AUDIOBOX USB types.

Recommended Print Settings: (What my pictures show I used)

- 0.6mm Nozzle (would work with default 0.4mm Nozzle)

- 0.24mm Layer Height (would work with 0.2mm LH on 0.4mm nozzle)

- 20% Infill

- Tree Supports on pictured places (I used auto and it already put them pictured above, if they are not in the same place, put them there)

- Outer brim of 3mm

- Material: PLA tested!

Turntable: https://youtube.com/shorts/-jYYNkHOcBc

>DO NOT resell/sell it by itself

>DO NOT redistribute this asset freely, please simply redirect them to this page

>DO credit me if you use it